Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Automatic Transmission Flex Plate Removal

Chevrolet Sonic Repair Manual / Powertrain / Transmission/Transaxle / Manual / Clutch / Automatic Transmission Flex Plate Removal

Special Tools

EN-652 Automatic Transmission Flex Plate Holder

For equivalent regional tools, refer to Special Tools.


    Install the EN-652 holder  (1) to hold the automatic
  1. Install the EN-652 holder  (1) to hold the automatic transmission flex plate (2).
  2. Loosen the 6 automatic transmission flex plate bolts.
  3. Remove the EN-652 holder  (1).


  4. Remove the 6 automatic transmission flex plate bolts (2).
  5. Remove the automatic transmission flex plate (1).
Automatic Transmission Flex Plate Installation
Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Clean the automatic transmission flex plate bolt threads. Install ...

Transmission Assembly
...

Other materials:

Rocking the Vehicle to Get it Out
Turn the steering wheel left and right to clear the area around the front wheels. Turn off any traction system. Shift back and forth between R (Reverse) and a low forward gear, spinning the wheels as little as possible. To prevent transmission wear, wait until the wheels stop spinning before s ...

Brake Rotor Thickness Variation Measurement
Warning: Refer to Brake Dust Warning. Note: Any disc brake rotor that exhibits thickness variation exceeding the maximum acceptable level must be refinished or replaced. Thickness variation exceeding the maximum acceptable level can cause brake pulsation. If the inboard fricti ...

Exhaust Rear Muffler Heat Shield Replacement
Exhaust Rear Muffler Heat Shield Replacement Callout Component Name Preliminary Procedure Disconnect the exhaust system hangers in the rear and allow the exhaust system to rest on the rear axle. 1 ...

В© 2014-2024 Copyright www.csmans.com
 
0.0108