|
Callout |
Component Name |
|---|---|
|
1 |
Differential Carrier Assembly |
|
2 |
Final Drive Sun Gear |
Definitions and Abbreviations
Differential Carrier Removal (6T40/45/50)Fog Lamp Aiming
Preparation Procedure
Note: Horizontal aim is not adjustable on this vehicle. Vertical
aim is done by an adjusting nut located on the rear of the fog lamp. Prior
to aiming the fog lamps, perform the following steps:
Completely assemble all of the components on the vehi ...
Tire Rotation
In order to equalize wear, rotate the tires at the specified intervals. Also,
rotate the tire and wheel assembly whenever you notice uneven tire wear.
Radial tires tend to wear faster in the shoulder area, particularly in front
positions, due to design. Radial tires in non-drive locations may ...
Water Pump Pulley Installation
Note: Counterhold the crankshaft balancer. The belt has to be
installed for this procedure.
Install the water pump pulley (2) to the water pump (3).
Caution: Refer to Fastener Caution.
Install the 3 water pump pulley bolts (1) with lockin ...