Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Instrument Panel Lower Trim Pad Cover Replacement (With AAL)

Chevrolet Sonic Repair Manual / Body / Body Interior / Dashboard Assembly / Instrument Panel Lower Trim Pad Cover Replacement (With AAL)



Instrument Panel Lower Trim Pad Cover Replacement

Callout

Component Name

Preliminary Procedure

Disable the SIR system. Refer to SIR Disabling and Enabling.

1

Instrument Panel Lower Trim Pad Fastener (Qty:?€‰4)

Caution:

Refer to Fastener Caution.

2

Instrument Panel Lower Trim Pad Cover

Procedures

  1. Use a flat bladed plastic trim tool in order to disengage the retainers securing the lower trim pad cover to the instrument panel assembly.
  2. Disconnect the electrical connectors.
  3. When replacing the instrument panel lower trim pad, transfer all necessary components.
Instrument Panel Lower Intermediate Reinforcement Replacement
Instrument Panel Lower Intermediate Reinforcement Replacement Callout Component Name Preliminary Procedures Disable the SIR system. ...

Instrument Panel Lower Trim Pad Cover Replacement (Without AAL)
Instrument Panel Lower Trim Pad Cover Replacement Callout Component Name 1 Instrument Panel Lower Trim Pad Fastener (Qty ...

Other materials:

Starting the Engine
The vehicle has a Computer-Controlled Cranking System. It assists in starting the engine and protects components. If the ignition key is turned to START and then released when the engine begins cranking, the engine will continue cranking for a few seconds or until the engine starts. If the eng ...

Windshield Upper Reveal Molding Replacement
Windshield Upper Reveal Molding Replacement Callout Component Name Preliminary Procedures Remove the windshield to replace the reveal molding. Refer to Windshield Replacement. 1 Windshield Revea ...

Thrust Washer and Bearing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. Caution: Do not allow the bearings to spin. Turn them slowly by hand. Spinning the beari ...

© 2014-2021 Copyright www.csmans.com
   
0.0111