Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Instrument Panel Upper Trim Panel Replacement - Left Side

Chevrolet Sonic Repair Manual / Body / Body Interior / Center Console / Instrument Panel Upper Trim Panel Replacement - Left Side



Instrument Panel Upper Trim Panel Replacement - Left Side

Callout

Component Name

Preliminary Procedure

  1. Remove the instrument cluster assembly. Refer to Instrument Cluster Replacement.
  2. Remove the instrument panel center molding. Refer to Instrument Panel Center Molding Replacement.
  3. Remove the instrument panel center upper molding. Refer to Instrument Panel Center Upper Molding Replacement.
  4. Remove the left instrument panel accessory upper trim plate. Refer to Instrument Panel Accessory Upper Trim Plate Replacement.
  5. Remove the left instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.

1

Instrument Panel Upper Trim Panel Fastener

Caution:

Refer to Fastener Caution.

2

Instrument Panel Upper Trim Panel

Procedures

  1. Use a flat bladed plastic trim tool in order to disengage the retainers securing the upper trim panel to the instrument panel assembly.
  2. When replacing the instrument panel upper trim panel, transfer all necessary components.
Instrument Panel Upper Compartment Door Latch Replacement
Instrument Panel Upper Compartment Door Latch Replacement Callout Component Name 1 Instrument Panel Upper Compartment Do ...

Instrument Panel Upper Trim Panel Replacement - Right Side
Instrument Panel Upper Trim Panel Replacement - Right Side Callout Component Name Preliminary Procedure Disable the SIR system. Ref ...

Other materials:

Front Disc Brake Pads Replacement
Removal Procedure Warning: Refer to Brake Dust Warning. Note: Always replace disc brake pads in axle sets. Inspect the fluid level in the brake master cylinder reservoir. If the brake fluid level is midway between the maximum-full point and the minimum allowab ...

Replacing Engine Gaskets
Gasket Reuse and Applying Sealants Do not reuse any gasket unless specified. Gaskets that can be reused will be identified in the service procedure. Do not apply sealant to any gasket or sealing surface unless called out in the service information. Separating ...

Turbocharger Oil Feed Pipe Replacement
Removal Procedure Open the hood. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement. Remove the turbocharger oil feed p ...

В© 2014-2019 Copyright www.csmans.com
   
0.0145