Chevrolet Sonic Repair Manual: Oil Lines

Oil Level Indicator and Tube Removal

Remove the oil dipstick. Remove the oil level indicator tube bolt (1). Note: If the engine oil level is at the maximum level, oil may emerge while removing the oil dipstick ...

Oil Flow Check Valve Replacement

Oil Flow Check Valve Replacement Callout Component Name Preliminary Procedure Remove the generator. Refer to Generator Replacem ...

Other materials:

Stationary Window Waterleak Repair
Warning: If any water enters the vehicle interior up to the level of the carpet or higher and soaks the carpet, the sensing and diagnostic module (SDM) and the SDM harness connector may need to be replaced. The SDM could be activated when powered, which could cause deployment of the air ...

Instrument Panel Center Molding Replacement (With U58)
Instrument Panel Center Molding Replacement Callout Component Name 1 Instrument Panel Center Molding Assembly Procedure Use a flat bladed plastic trim tool in the shown locations, then rotate the trim tool 90 ...

Battery Current Sensor Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Disconnect the battery current sensor from the body harness connector. Unclip the battery current sensor from the battery tray. Remove the battery ...