Chevrolet Sonic Owner's Manual: Personalization Menu (Radio without Touchscreen)

Chevrolet Sonic Owner's Manual / Instruments and Controls / Vehicle Personalization / Personalization Menu (Radio without Touchscreen)

Use the audio system controls to access the personalization menus for customizing vehicle features.

The following are all possible personalization features. Depending on the vehicle, some may not be available.

CONFIG (Configuration): Press to access the Configuration Settings menu.

MENU/TUNE: Turn to scroll through the menus. Press to enter the menus and select the menu items.

BACK: Press to exit or move backward
in a menu.

Entering the Personalization Menus

1. Press CONFIG to access the Configuration Settings menu.

2. Turn the MENU/TUNE knob to highlight Vehicle Settings.

3. Press MENU/TUNE to select the Vehicle Settings menu.

The following list of menu items may be available:

Comfort and Convenience
Climate and Air Quality
Language
Lighting
Power Door Locks
Remote Lock, Unlock, Start
Return to Factory Settings

Comfort and Convenience

Select the Comfort and Convenience menu and the following may display: Chime Volume Auto Wipe in Reverse Gear Chime Volume This allows selection of the chime volume level. Select Normal or ...

Other materials:

Rear Side Door Window Outer Sealing Strip Replacement (Hatchback)
Rear Side Door Window Outer Sealing Strip Replacement Callout Component Name 1 Rear Side Door Window Outer Sealing Strip Screw Caution: Refer to Fastener Caution. Tighten 2?€‰Y (18?€‰lb?€‰i ...

Valve Guide Reaming, and Valve and Seat Grinding
Valve Cleaning Procedure Use soft bristle wire brush to clean any carbon build-up from the valve head. DO NOT use a wire brush on any part of the valve stem. The valve stem is chrome plated to provide enhanced wear characteristics. Wire brushing the stem could remove the chr ...

Camshaft Timing Chain Removal
Special Tools EN-952 Fixing Pin EN-953-A Fixing Tool EN-955-10 Fixing Pin from EN-955 Kit For equivalent regional tools, refer to Special Tools. The engine should be adjusted to TDC. The crankshaft should be fixed with EN-952 fixing pin. The camshaft should be fixed with EN-953 ...

0.0122