Chevrolet Sonic Repair Manual: Quarter Outer Panel Pressure Relief Valve Replacement
|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement |
|
|
1 |
Quarter Outer Panel Pressure Relief Valve Assembly |
Quarter Inner Trim Finish Panel Replacement (Hatchback)
Quarter Inner Trim Finish Panel Replacement
Callout
Component Name
Preliminary Procedures
Remove the rear side door opening floor c ...
Rear Compartment Lid Inner Panel Trim Replacement (Sedan)
Rear Compartment Lid Inner Panel Trim Replacement
Callout
Component Name
Preliminary Procedures
Remove the rear compartment lid out ...
Other materials:
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning.
Note: There are several types of plastic collar fuel and evaporative
emission quick connect fittings used on this vehicle.
Bartholomew (1)
Q Release (2)
Squeeze to Rele ...
Oil Level Indicator and Tube Removal
Remove the oil dipstick.
Remove the oil level indicator tube bolt (1).
Note: If the engine oil level is at the maximum level, oil may
emerge while removing the oil dipstick guide tube.
Remove the oil level indicator tube (2) and oil level indicator seal.
...
Secondary Air Injection System Description
The Secondary Air Injection System aids in the reduction of hydrocarbon exhaust
emissions during a cold start. This occurs when the start-up engine coolant temperature
(ECT) is between −10 to +56?C (14?33?F), the intake air temperature (IAT) is greater
than −10?C (14?F) and it has ...
0.0262