|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the rear side door window switch bezel. Refer to Rear Side Door Window Switch Bezel Replacement. |
|
|
1 |
Rear Side Door Window Switch Assembly Procedure
|
Rear Side Door Window Switch Bezel ReplacementBattery Load Management
The vehicle has Electric Power Management (EPM) that estimates the battery's
temperature and state of charge. It then adjusts the voltage for best performance
and extended life of the battery.
When the battery's state of charge is low, the voltage is raised slightly to
quickly bring t ...
How to Identify Plastic Parts
saepvcsae
Plastic parts can be identified by the SAE code, which is usually found on the
rear of the part, and/or by the characteristics of the plastic. Knowing the type
of plastic aids in selecting the proper repair materials and in selecting the proper
repair procedure.
Look for the SAE ...
Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral
(N) position, the transmission will provide engine braking. In this operating range,
the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine
braking mode, the following changes occur with ...