Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
1 |
Rear Wheelhouse Panel Liner Nut Caution: Refer to Fastener Caution.
2?€‰Y (18?€‰lb?€‰in) |
2 |
Rear Wheelhouse Panel Liner Screw (Qty:?€‰5) Tighten
3?€‰Y (27?€‰lb?€‰in) |
3 |
Rear Wheelhouse Panel Liner |
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
Sedan Taillamp Shown, Hatchback Taillamp Similar
1. Back-up Lamp
2. Turn Signal Lamp
3. Stop Lamp/Taillamp
4. Sidemarker Lamp
To replace one of these bulbs:
1. Open the trunk.
2. Remove the two screws, which secure the taillamp assembly.
3. Remove the taillamp assembly by pulling it stra ...
OnStar Description and Operation
This OnStar® system consists of the following components:
Telematics communication interface control module
OnStar® three button assembly
Microphone
Cellular antenna
Navigation antenna
Bluetooth® antenna (If equipped)
Back up battery (If equipped)
This system also interfaces wi ...
Hydraulic Brake Component Operation Visual Inspection
Disc Brake
With the tire and wheel assemblies removed and the brake rotors retained
by wheel lug nuts, visually inspect the brake caliper piston dust boot (2)
sealing area to ensure that there are no brake fluid leaks.
If any evidence of a brake fluid leak is p ...