Illustration |
Tool Number/Description |
---|---|
![]() |
CH-41013 J 41013 Rotor Resurfacing Kit |
![]() |
CH-42450-A J 42450-A Wheel Hub Resurfacing Kit |
![]() |
CH-45101 J 45101 Hub and Wheel Runout Gauge |
![]() |
CH-45101-100 J 45101-100 Conical Brake Rotor Washers |
Heated Seat Control Module Programming and Setup
The seat heating control module must be programmed with the proper calibration
software. The module stores and utilizes this information however if it is not properly
configured with the correct calibration software, the seat heating control module
will not control all of the vehicle features ...
Front Wheel Bearing and Hub Replacement
Special Tools
CH-50559 Wheel Hub/Bearing Remover Kit
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the steering knuckle assembly from the vehicle. Refer to Steering
...
Clutch and Differential Housing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exposed to chemicals.
Clean the clutch housing (1) with a suitable solvent.
Air dry all the parts.
Inspect ...