Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Special Tools

Illustration

Tool Number/ Description


CH 41013

J 41013

Rotor Resurfacing kit


CH 42450–A

J 42450–A

Wheel Hub Resurfacing Kit

Spare Tire Kit Installation
Installation Instructions Part Number 95280943 Procedure ...

Steel Wheel Repair Description
Caution: Do not heat wheels in an attempt to soften them for straightening or repair damage from striking curbs, etc. Do not weld wheels. The alloy used in these wheels is heat-treated and un ...

Other materials:

Rear Seat Back Cushion Latch Release Knob Bezel Replacement
Rear Seat Back Cushion Latch Release Knob Bezel Replacement Callout Component Name 1 Rear Seat Back Cushion Latch Release Handle Bezel Procedure Use a flat-bladed tool to tilt the rear of the handle upward, then l ...

Tire Inflation Description
When you inflate the tires to the recommended inflation pressures, the factory-installed wheels and tires are designed in order to handle loads to the tire's rated load capacity. Incorrect tire pressures, or under-inflated tires, can cause the following conditions: Vehicle handling co ...

Engine Oil and Oil Filter Replacement
Removal Procedure Open hood. Place a drain pan below the vehicle. Caution: To prevent damage to oil filter cap ensure proper tool is used. Do not use an open end wrench which may cause damage to filter cap. Using a 24mm socket or closed end wrench loosen ...

© 2014-2025 Copyright www.csmans.com
 
0.0092