Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Winter Tires

This vehicle was not originally equipped with winter tires. Winter tires are designed for increased traction on snow and ice-covered roads. Consider installing winter tires on the vehicle if frequent driving on ice or snow covered roads is expected. See your dealer for details regarding winter tire availability and proper tire selection. Also, see Buying New Tires.

With winter tires, there may be decreased dry road traction, increased road noise, and shorter tread life. After changing to winter tires, be alert for changes in vehicle handling and braking.

If using winter tires:

Winter tires with the same speed rating as the original equipment tires may not be available for H, V, W, Y, and ZR speed rated tires. If winter tires with a lower speed rating are chosen, never exceed the tire's maximum speed capability.

All-Season Tires
This vehicle may come with all-season tires. These tires are designed to provide good overall performance on most road surfaces and weather conditions. Original equipment tires designed to GM' ...

Summer Tires
This vehicle may come with high performance summer tires. These tires have a special tread and compound that are optimized for maximum dry and wet road performance. This special tread and compound ...

Other materials:

Lockout Protection
If the driver side power door lock switch is pressed when the driver door is open and the key is in the ignition, all of the doors will lock and then the driver door will unlock. If Unlocked Door Anti Lockout is turned on and: the vehicle is off, the driver door is open, and door locking is r ...

Engine Coolant Fan Shroud Replacement (LDE LUW)
Engine Coolant Fan Shroud Replacement Callout Component Name Preliminary Procedure Remove the radiator surge tank. Refer to Radiator Surge Tank Replacement. Unclip transmission cooler lines from shroud if equipped. Un ...

Lock Cylinder Coding - Ignition
The ignition lock cylinder uses 8 key cut positions, 1?E. The ignition cylinder tumblers (3) are located on alternate sides of the cylinder (5). They are not snap-in and are not self-retaining. It follows the key code with the first tumbler being the first depth of the ke ...

В© 2014-2019 Copyright www.csmans.com
   
0.0114