The engine cooling system of the Nissan Armada is factory-filled with a precisely balanced mixture consisting of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water. This formulation ensures reliable year-round protection against freezing, overheating, and corrosion.
This advanced coolant used in the Nissan Armada includes corrosion inhibitors designed to protect internal engine components, making additional cooling system additives unnecessary under normal conditions.
Maintaining the correct coolant composition is essential for preserving engine efficiency, preventing overheating, and extending the service life of the Nissan Armada powertrain.
WARNING
Opening the system under pressure may cause hot coolant to spray out, resulting in serious burns or injury.
CAUTION
These substances may clog passages within the cooling system and lead to serious damage to the engine, transmission, or radiator components.
This coolant is pre-diluted to provide freeze protection down to −34°F (−37°C). If operating in extremely cold climates, additional concentrate may be added according to manufacturer instructions.
If using an alternative coolant, carefully follow the product guidelines to ensure equivalent protection. Using incorrect coolant types may compromise the Nissan Armada cooling system and lead to costly repairs.
Mixing different coolant types, including green antifreeze or non-distilled water, may significantly reduce its lifespan and effectiveness.
Refer to the maintenance schedule for detailed service intervals and always maintain the correct coolant quality for optimal Nissan Armada performance.
Regular inspection of coolant levels and components in the Nissan Armada engine bay helps ensure reliable operation and prevents overheating issues, especially during demanding driving conditions.
Checking engine coolant levelSIR Inflator Module Handling and Storage Warning
Warning: When carrying an undeployed inflator module:
Do not carry the inflator module by the wires or connector.
Make sure the air bag opening points away from you.
When storing an undeployed inflator module:
Make sure the air bag opening points away from the surface o ...
Battery Charging
Special Tools
EL 50313 Battery Tester
For equivalent regional tools, refer to Special Tools.
Diagnostic Aids
For best results, use an automatic taper-rate battery charger with a
voltage capability of 16 V.
The charging area should be well ventilated.
Do not charge a bat ...
Input and Output Speed Sensor Installation
Input and Output Speed Sensor Installation
Callout
Component Name
1
Input Speed Sensor Assembly Seals
2
Input Speed Sensor Assembly
3
Input Speed Sensor Bolt ...