
This light turns on whenever the Daytime Running Lamps are in use.
See Daytime Running Lamps (DRL).
High-Beam On Light
Front Fog Lamp LightHood Hold-Open Rod Replacement
Hood Hold-Open Rod Replacement
Callout
Component Name
1
Hood Hold-Open Rod
Warning: When a hood hold open device is being removed or
installed, provide alternate support to avoid the possibility of damage
...
Tire and Wheel Assembly Runout Measurement - On-Vehicle
Raise and support the vehicle.
Closely inspect each tire for proper and even bead seating.
If any of the tire beads were not properly or evenly seated, reseat the
tire bead, then proceed to step 4. Refer to Tire and Wheel Removal and Installation.
Wrap the circumferenc ...
Camshaft Sprocket Installation
Install the intake camshaft sprocket (3).
Install the intake camshaft position sensor exciter wheel (2) and the intake
camshaft sprocket bolt (1), but do not tighten yet.
Install the exhaust camshaft sprocket.
Note: Tightening of camshaft sprocket bolts will ...