The in-vehicle Bluetooth system can send numbers during a call. This is used when calling a menu-driven phone system.
1. Turn or press the Push/MENU/ TUNE knob and select Enter Number.
2. Enter the character sequence. See “Entering a Character Sequence� in Operation.
Muting a Call
Pairing with TouchscreenEngine Heater
The engine heater can provide easier starting and better fuel economy during
engine warm-up in cold weather conditions at or below −18°C (0°F). Vehicles with
an engine heater should be plugged in at least four hours before starting.
1. Turn off the engine.
2. Open the hood and unwrap ...
Inspection/Maintenance (I/M) System DTC Table
Inspection/Maintenance (I/M) System DTC Table
System
DTCs Required to Set System Status to YES
If an inspection/maintenance system status indicator did not update to
yes during the Inspection/Maintenance Complete System
Set Pro ...
System maintenance
Example
Basic information
The two radar sensors A for the I-BSI system are located near the rear bumper.
Always keep the area near the radar sensors clean.
The radar sensors may be blocked by temporary ambient conditions such as snow,
splashing water, mist or fog.
The blocked condition ma ...