The engine air cleaner/filter is located in the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview for more information on location.
How to Check and Add Fluid
When to Inspect the Engine Air Cleaner/FilterBrake Pedal Pushrod Inspection
Disconnect the brake pedal pushrod (2) from the brake pedal.
Reposition the pedal pushrod boot (1) toward the front of the vehicle to
expose as much of the pedal pushrod (2) as possible.
Inspect the brake pedal pushrod (2) for straightness.
If the brake p ...
Data Link Communications Description and Operation
Note: This is an overview of different serial data buses used by GM
devices to communicate with each others. Use Data Communication Schematics to
find out which serial data buses are configured for a specific vehicle.
Circuit Description
There are many components in a vehicle t ...
Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should
be performed before replacing the bushing, shaft, and in some cases, the component
which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces
before inspecting for damage.
Any of the followin ...