Callout |
Component Name |
---|---|
1 |
Front Floor Console Extension Push-In Retainer |
2 |
Front Floor Console Extension Procedure
Use a flat bladed plastic trim tool in order to release the retainers securing the extension to the console assembly. |
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs
to be matched to a new tire/wheel position after rotating the tires or replacing
one or more of the TPMS sensors. The TPMS sensor matching process should also be
performed after replacing a spare tire with a road ...
Instrument Panel Knee Bolster Replacement
Instrument Panel Knee Bolster Replacement
Callout
Component Name
Preliminary Procedures
Disable the SIR system. Refer to SIR Disabling and Enabling.
Remove the driver inflatable restraint instrument panel lower module.
...
Rear Wheel Speed Sensor Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal
and Installation.
Remove the rear wheel speed sensor ...