Chevrolet Sonic manuals

Audi Q7 (4M) 2016-2022 Owner's Manual: Lane departure warning

General information

Applies to: vehicles with lane departure warning

The lane departure warning can detect lane marker lines within the limits of the system. If you are approaching a detected lane marker and it appears likely that you will leave the lane, the system can warn you with corrective steering and a steering wheel vibration, if necessary.

The system functions in the speed range of approximately 40 mph - 155 mph (65 km/h - 250 km/h).

WARNING

Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.

Description

Applies to: vehicles with lane departure warning

Fig. 118 Turn signal lever: lane departure warning button
Fig. 118 Turn signal lever: lane departure warning button

Fig. 119 Instrument cluster: driver assistance display
Fig. 119 Instrument cluster: driver assistance display

Switching the lane departure warning on and off

Display and warning

The availability and readiness to provide warnings will be indicated with the indicator lights. You can also open the Driver assistance display in the on-board computer. The displays > fig. 119 match the functions of the indicator lights.

  1. White lines: the lane departure warning is switched on but not ready to provide warnings.
  2. Green line: the lane departure warning is ready to provide warnings on the respective side.
  3. Corrective steering will be indicated with .

    If the lane departure warning must intervene for a long period of time, a message will request the driver to drive in the center of the lane. The steering wheel can also vibrate to warn you if lane boundaries are detected during a passing maneuver.

The lane departure warning is ready to provide warnings if an object is detected on at least one side of the individual lane.

If the indicator light turns on, the lane departure warning is not ready to provide warnings.

This may occur due to the following system limits or situations:

Steering intervention request

If Audi active lane assist intervenes multiple times when no steering activity is detected, the steering intervention request will provide a warning using audio and visual signals, such as .

Take over the steering and keep your hands on the steering wheel so that you will be ready to steer at any time. The system may no longer be ready to provide warnings after a short time, and it will only become active again later.

If the driver does not take over steering, the lane departure warning will no longer be ready to provide warnings. If the vehicle is equipped with emergency assist and it is ready to function, it will be activated.

Behavior when a turn signal is active

Applies to: vehicles with side assist: The system will not warn you if you activate a turn signal before crossing the lane marker line. In this case, it assumes that you are changing lanes intentionally.

Applies to: vehicles with side assist: If the turn signal is activated, Audi active lane assist is ready, and a lane change has been classified as critical by lane assist due to vehicles traveling beside you or due to approaching vehicles, then a noticeable corrective steering movement will occur briefly before exiting the lane. This will attempt to keep your vehicle in the lane.

WARNING

Tips

Adjusting the lane departure warning

Applies to: vehicles with lane departure warning

You can adjust Audi active lane assist individually.

The settings depend on the vehicle equipment.

Possible settings:

Message

Applies to: vehicles with lane departure warning

If or is displayed when there is a malfunction, the lane departure warning and lane guidance functions of the adaptive cruise functions may be unavailable or limited.

A message that indicates the cause and possible solution may appear with some displays. The weather conditions may be too poor or the camera may be covered. Clean the area in front of the camera and try to turn on the systems again later.

If the malfunction remains, drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.

Distance warning
Description Applies to: vehicles with distance warning Applies to: vehicles with adaptive cruise control: Fig. 116 Instrument cluster: display of the current distance Applies to: vehicles with ...

Audi pre sense
Function overview Applies to: vehicles with Audi pre sense Within the limits of the system, the Audi pre sense functions can initiate measures in certain driving situations to protect the vehicle occu ...

Other materials:

Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam Changer): Push the turn signal lever away from you to turn the high beams on. Push the lever again or pull the lever toward you to return to low beams. This indicator light turns on in the instrument cluster when the high-beam headlamps are on. ...

Crankshaft Front Oil Seal Installation
Special Tools EN-6351 Mounting Sleeves For equivalent regional tools, refer to Special Tools. Clean the sealing surfaces. Slide the EN-6351 sleeves  (2) protective sleeve onto the crankshaft journal. Slide the crankshaft front oil seal (1) over the protective sleev ...

Low and Reverse and 1-2-3-4 Clutch Housing Assemble (6T30)
Table 1: 1??? Clutch Piston Installation Table 2: Low and Reverse Clutch Piston Installation 1??? Clutch Piston Installation 1??? Clutch Piston Installation Callout Component Name ...

В© 2014-2022 Copyright www.csmans.com
 
0.0082