Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press and release .
3. Immediately after completing Step 2, press and hold
for at least four seconds or until
the turn signal lamps flash.
When the engine starts, the parking lamps will turn on and remain on as long
as the engine is running. The ...
Body Hinge Pillar Lower Reinforcement Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove all ...
Dome Lamp Bezel Replacement
Dome Lamp Bezel Replacement
Callout
Component Name
1
Dome Lamp Bezel Cover
Procedures
Grasp the bezel cover and pull downward to remove from the lamp
assembly.
Disconnect the electrical connections, as ne ...