Chevrolet Sonic manuals

Audi Q7 (4M) 2016-2022 Owner's Manual: Start/Stop system

Description

Applies to: vehicles with Start/Stop system

The Start/Stop system can help increase fuel economy and reduce CO2 emissions.

In Start/Stop mode, the engine shuts off automatically when stopped, for example at a traffic light. If certain conditions are met, the engine may stop before the vehicle has come to a complete stop. If you press the accelerator pedal when this happens, the engine will start and driving power will be transmitted.

The ignition and important assist systems such as the brake booster will remain available during the Stop phase. The engine will restart automatically when needed.

The Start/Stop system is automatically activated once the ignition is switched on.

Switching the Start/Stop system off and on

The button is located above the selector lever in the center console. The LED in the button turns on when the function is switched off.

If you switch the system off during a Stop phase, the engine will start again automatically.

Basic requirements

Note

Always switch the Start/Stop system off when driving through water.

Tips

Stopping and starting the engine

Applies to: vehicles with Start/Stop system

If the parking brake is set, the engine will only start again when the accelerator pedal is pressed.

Tips

Starting and stopping the engine automatically

Applies to: vehicles with Start/Stop system

The system checks if certain conditions are met before and during the Stop phase, and determines if the engine stops and how long it remains stopped. For example, if power usage is high, the engine will not be stopped. Along with other conditions, the following factors influence the automatic engine start or stop:

Messages

Applies to: vehicles with Start/Stop system

The following messages may appear depending on the vehicle equipment:

Drive system: please start the vehicle manually

This message appears when specific conditions are not met during a Stop phase. The Start/Stop system will not be able to restart the engine. The engine must be started with the START ENGINE STOP button.

Vehicle starting system: malfunction! Please contact Service

There is a malfunction in the Start/Stop system.

Drive the vehicle to an authorized Audi dealer or authorized Service Facility as soon as possible to have the malfunction corrected.

Drive system
Braking in A new vehicle must be broken in within the first 1,000 miles (1,500 km) so that all moving parts work smoothly together, which helps to increase the service life of the engine and other dri ...

Brakes
General information You can apply the vehicle's brakes using the brake pedal. Operating noise Noises may occur when braking depending on the speed, braking force, and outside conditions such as temper ...

Other materials:

SIR Seatbelt Pretensioner Handling Warning
Warning: When carrying an undeployed inflatable restraint seat belt retractor pretensioner: Do not carry the seat belt pretensioner by the seat belt webbing or pigtail connector, if equipped. Carry the seat belt pretensioner by the housing, keeping hands and fingers away fro ...

Master Cylinder Bench Bleeding
Warning: Refer to Brake Fluid Irritant Warning. Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution. Secure the mounting flange of the brake master cylinder in a bench vice so that the rear of the primary piston is accessible. Remov ...

Drive Sprocket, Driven Sprocket, and Drive Link Cleaning and Inspection
Drive Sprocket, Driven Sprocket, and Drive Link Cleaning and Inspection Callout Component Name 1 Drive Sprocket Thrust Washer 2 Drive Sprocket Retainer Ring 3 Drive ...

В© 2014-2022 Copyright www.csmans.com
 
0.0085