Chevrolet Sonic Owner's Manual: Accepting or Declining a Call
When an incoming call is received, the infotainment system mutes and a ring tone is heard in the vehicle.
Accepting a Call
Turn the Push/MENU/TUNE knob to “Answer” and press the Push/ MENU/TUNE knob to accept the call.
Declining a Call
Turn the Push/MENU/TUNE knob to “Decline” and press the Push/ MENU/TUNE knob to decline the call.
Making a Call
To make a call:
1. Press once or twice (depending
on the radio).
2. Enter the character sequence. See “Entering a Character Sequence” in Operation.
3. Select Call to start dialing the number ...
Call Waiting
Call waiting must be supported on the Bluetooth phone and enabled by the wireless
service carrier to work.
Accepting a Call
Turn the Push/MENU/TUNE knob to “Answer” and press the Push/ MENU/TU ...
Other materials:
Instrument Panel Center Molding Replacement (With U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Windshield Wiper and Washer Switch Replacement
Windshield Wiper and Washer Switch Replacement
Callout
Component Name
Preliminary Procedure
Remove the upper trim cover and the lower trim cover from the steering
column. Refer to Steering Column Lower Trim Cover Replacemen ...
Piston, Connecting Rod, and Bearing Removal
Install the crankshaft balancer bolt.
Set the pistons 1 and 4 to TDC in direction of engine rotation.
Note: Note cylinder sequence.
Mark the connecting rod with the connecting rod bearing cover (1).
Remove the 4 connecting rod bearing caps bol ...
0.0068