AntennaBrake Fluid Level Indicator Switch Replacement
Removal Procedure
Disconnect the brake fluid level indicator switch
electrical connector.
Using a small, flat-bladed tool, lift the locking
tab on the underside of the brake fluid level indicator switch (1) and remove
the switch.
Inspect the maste ...
Steering Linkage Outer Tie Rod Inspection
Special Tools
GE-8001 Dial Indicator Set
For equivalent regional tools, refer to Special Tools.
Note: This inspection procedure does not supersede local government
required inspections that have more stringent requirements.
Inspect the outer tie rod seal. If the outer tie rod ...
Secondary Air Injection System Description
The Secondary Air Injection System aids in the reduction of hydrocarbon exhaust
emissions during a cold start. This occurs when the start-up engine coolant temperature
(ECT) is between −10 to +56?C (14?33?F), the intake air temperature (IAT) is greater
than −10?C (14?F) and it has ...