Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Air Cleaner Element Replacement

Removal Procedure

    Disconnect mass air flow sensor wiring harness plug (2) from mass air
  1. Disconnect mass air flow sensor wiring harness plug (2) from mass air flow sensor (3).
  2. Unclip mass air flow sensor wiring harness retainer clip from air cleaner housing (1).

  3. Remove the air cleaner outlet duct clamp (3).
  4. Remove the air cleaner outlet duct (2) from air cleaner housing (1).

  5. Remove the 5 air cleaner housing bolts (1).
  6. Remove the air cleaner upper housing (2) from the air cleaner lower housing (4).
  7. Remove the air cleaner element (3).
Installation Procedure

    Install the air cleaner element (3).
  1. Install the air cleaner element (3).
  2. Install the air cleaner upper housing (2) to the air cleaner lower housing (4).
  3. Caution:

    Refer to Fastener Caution.

  4. Install the 5 air cleaner housing bolts (1).

  5. Install the air cleaner outlet duct (2) to the air cleaner housing (1).
  6. Install the air cleaner outlet duct clamp (3).

  7. Clip in mass air flow sensor wiring harness retainer clip to air cleaner housing (1).
  8. Connect the mass air flow sensor wiring harness plug 2) to the mass air flow sensor (3).
Secondary Air Injection Pump Air Cleaner Pipe Replacement
Secondary Air Injection Pump Air Cleaner Pipe Replacement Callout Component Name 1 Hose Retainer (QTY:2) Note: S ...

Passenger Compartment Air Filter Replacement (LHD)
Passenger Compartment Air Filter Replacement Callout Component Name Preliminary Procedure Remove IP compartment. Refer to Instr ...

Other materials:

Turning the System On or Off
/VOL (Power/Volume): Press to turn the system on and off. Automatic Switch-Off If the infotainment system is on after the ignition is turned off, the system will turn off automatically after 10 minutes. Volume Control /VOL (Power/Volume): Turn to adjust the volume. (Phone/Mute): For ve ...

Rear Compartment Lid Nameplate Replacement (Sedan)
Rear Compartment Lid Nameplate Replacement Callout Component Name 1 Rear Compartment Lid Nameplate Caution: Refer to Exterior Trim Emblem Removal Caution. Procedure The part and surface should be ...

Gear Position Sensor Replacement
Gear Position Sensor Replacement Callout Component Name Preliminary Procedure Unclip the engine control module (ECM) and bracket from the battery tray. 1 Gear Position Sensor Magnet Bolt ...

В© 2014-2026 Copyright www.csmans.com
 
0.007