Chevrolet Sonic Repair Manual: Air Cleaner Inlet Duct Replacement
- Removal Procedure
-
- Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
- Remove the upper intake air duct plastic fastener (1).
- Pull the lower portion of the intake air duct outward to release the duct from the rubber mounting grommet (1).
- Pull downward to separate the lower portion of the intake air duct (2) from the upper duct (3).
- Installation Procedure
-
- Attach the lower portion of the intake air duct (2) to the upper duct (3).
- Attach the lower portion of the intake air duct to the rubber mounting grommet (1).
- Install the upper intake air duct plastic fastener (1) to the body bracket.
- Install the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
Air Cleaner Element Replacement
Removal Procedure
Disconnect mass air flow sensor wiring harness plug (2) from mass air
flow sensor (3).
Unclip mass air flow sensor wiring harness retainer cl ...
Air Cleaner Outlet Duct Replacement
Air Cleaner Outlet Duct Replacement
Callout
Component Name
1
Air Cleaner Outlet Duct Clamp
2
...
Other materials:
Air Intake System Description
Circuit/System Description
The primary function of the air intake system is to provide filtered air
to the engine. The system uses a filter element mounted in a housing. The filter
housing is remotely mounted and uses intake ducts to route the incoming air
into the throttle body. T ...
Torque Converter Housing with Fluid Pump Assembly Removal (Non Hybrid)
Torque Converter Housing with Fluid Pump Assembly Removal
Callout
Component Name
1
Torque Converter and Differential Housing Bolts M8 x 30 (Qty: 15)
2
Torque Conv ...
Differential Case Disassemble
Special Tools
6-9607346 Sensor Ring Gear Puller
J-810704 Steering Column Center Bar Puller
J-810721 Axle Shaft Seal Remover Support Base
R-0006749 Support Base
R-0407011 Bearing Race Remover
R-0007761 Universal Handle for Pullers and Installers
S-9407195 Pinion Gear Case Bearing ...
0.0075