Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the air conditioning compressor. Refer to Air Conditioning Compressor Replacement. |
|
1 |
Air Conditioning Compressor Clutch Nut Caution: Refer to Fastener Caution. Procedure
Use the CH-37872 holder to hold the compressor clutch plate from turning when removing the nut. Special Tools
CH-37872 Clutch Plate Holder For equivalent regional tools, refer to Special Tools. |
2 |
Air Conditioning Compressor Clutch |
3 |
Air Conditioning Compressor Clutch Shim (Qty: 5) |
4 |
Retaining Ring |
5 |
Air Conditioning Compressor Pulley |
6 |
Retaining Ring |
7 |
Air Conditioning Compressor Coil |
Brake Rotor Surface and Wear Inspection
Warning: Refer to Brake Dust Warning.
If the inboard friction surface of the brake rotor is not accessible, reposition
and support the caliper with the brake pads. Refer to Front Disc Brake Pads
Replacement.
Clean the friction surfaces of the brake rotor with denatured alcohol, or ...
Strut and Shock Absorber Inspection
Note: The strut assembly DOES NOT have to be removed from the vehicle
to perform the following inspection procedure.
Note: A light film of oil on the top portion of the strut is normal.
DO NOT replace the strut for this condition.
Condition 1
Oil or fluid residue only o ...
Transmission Case Disassemble (Gen 1)
Special Tools
3-9506289 Universal Adapter
J-810700 Mainshaft Bearing Remover
J-810704 Center Bar Puller
M-680770 Universal Sliding Mallet
R-0007758 Holding Fixture
R-0007770 Holding Fixture Adapter Plates
T-0307000 Extractor and Driver Fixture
T-9807671 Slide Hammer
For eq ...