|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the air conditioning compressor. Refer to Air Conditioning Compressor Replacement. |
|
|
1 |
Air Conditioning Compressor Clutch Nut Caution: Refer to Fastener Caution. Procedure
Use the CH-37872 holder to hold the compressor clutch plate from turning when removing the nut. Special Tools
CH-37872 Clutch Plate Holder For equivalent regional tools, refer to Special Tools. |
|
2 |
Air Conditioning Compressor Clutch |
|
3 |
Air Conditioning Compressor Clutch Shim (Qty: 5) |
|
4 |
Retaining Ring |
|
5 |
Air Conditioning Compressor Pulley |
|
6 |
Retaining Ring |
|
7 |
Air Conditioning Compressor Coil |
Clutch
Air Conditioning Clutch Assembly Replacement (LUV)Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution.
Caution: Always connect or disconnect the wiring harness connector
from the EBCM/EBTCM with the ignition switch ...
Tire Pressure Indicator Sensor Replacement
Removal Procedure
Raise the vehicle on a suitable support. Refer to Lifting and Jacking
the Vehicle.
Remove the tire/wheel assembly from the vehicle. Refer to Tire and Wheel
Removal and Installation.
Dismount the tire from the rim. Refer to Tire Dismounting and Mounting. ...
Neutral - Engine Running (Gen 2)
When the gear selector is moved to the Neutral (N) position, the hydraulic and
electrical system operation is identical to Park (P) range. However, if Neutral
is selected after the vehicle was operating in Reverse (R), the normally-low 35R
pressure control solenoid is commanded OFF and the fol ...