Callout |
Component Name |
---|---|
Preliminary Procedure
|
|
1 |
Air Conditioning Compressor Bolt (Qty :3) Caution: Refer to Fastener Caution.
22 Y (16 lb ft) |
2 |
Air Conditioning Compressor Assembly Procedure
When replacing the air conditioning compressor, balance the compressor oil. Refer to Air Conditioning Compressor Oil Balancing. |
Headlamps, Front Turn Signal and Parking Lamps
Passenger Side Shown, Driver Side Similar
High-Beam Headlamp
Low-Beam Headlamp
Parking/Turn Signal Lamps
High-Beam Headlamp/Low-Beam Headlamp
Open the hood. See Hood.
For the driver side bulb, remove the windshield washer bottle filler
neck by turning it one-quarter ...
Instrument Panel Center Molding Replacement (Without U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Engine Coolant Thermostat Housing Replacement (LUW)
Removal Procedure
Remove the battery tray. Refer to Battery Tray Replacement.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Drain the cooling system. Refer to Cooling System Draining and Filling.
Disconnect the engine harness conn ...