Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Air Conditioning Compressor Replacement (LUV)

Chevrolet Sonic Repair Manual / HVAC / Cooling / Air Conditioning Compressor Replacement (LUV)



Air Conditioning Compressor Replacement

Callout

Component Name

Preliminary Procedure

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Remove the drivetrain and front suspension frame skid plate if equipped. Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement.
  4. Remove the charge air cooler inlet air hose. Refer to Charge Air Cooler Inlet Air Hose Replacement.
  5. Remove the engine drive belt from the air conditioning compressor. Refer to Drive Belt Replacement.
  6. Remove the air conditioning compressor and condenser hose from the compressor assembly and position out of the way. Refer to Air Conditioning Compressor and Condenser Hose Replacement.
  7. Disconnect the electrical connector.

1

Air Conditioning Compressor Bolt (Qty :3)

Caution:

Refer to Fastener Caution.

Tighten


22 Y (16 lb ft)

2

Air Conditioning Compressor Assembly

Procedure

When replacing the air conditioning compressor, balance the compressor oil. Refer to Air Conditioning Compressor Oil Balancing.

Air Conditioning Compressor Replacement (LDE, LUW, LWE)
Air Conditioning Compressor Replacement Callout Component Name Preliminary Procedure Recover the refrigerant. Refer to Refrigerant ...

Air Conditioning Compressor and Condenser Hose Replacement (LDE/LWE)
Removal Procedure Recover the refrigerant. Refer to Refrigerant Recovery and Recharging. Disconnect the A/C refrigerant pressure sensor electrical connector. Remove air ...

Other materials:

Brake Rotor Refinishing
Special Tools CH-41013 Rotor Resurfacing Kit CH-42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Warning: Refer to Brake Dust Warning. Note: The disc brake rotors do not require refinishing as part of routine brake system servic ...

Instrument Panel Center Air Outlet Replacement
Instrument Panel Center Air Outlet Replacement Callout Component Name Preliminary Procedure Remove the instrument panel center molding. Refer to Instrument Panel Center Molding Replacement. 1 In ...

Fuel Feed Pipe Replacement
Removal Procedure .- Remove the fuel feed pressure sensor. Refer to Fuel Pressure Sensor Replacement - Fuel Feed Pipe. Disconnect the fuel feed pipe (1). Refer to Plastic Collar Quick Connect Fitting Service. Remove the plastic retainer (1) ...

В© 2014-2025 Copyright www.csmans.com
 
0.0047