|
Callout |
Component Name |
|---|---|
Preliminary Procedure
|
|
|
1 |
Thermal Expansion Valve Bolts (Qty :2) Caution: Refer to Fastener Caution.
7 Y (62 lb in) |
|
2 |
Thermal Expansion Valve Note: Use NEW system seals. Refer to Air Conditioning System Seal Replacement. |
Air Conditioning Evaporator Hose Assembly Replacement
Evaporator Air Temperature Sensor Replacement (LHD)Front Disc Brake Pads Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning.
Note: Always replace disc brake pads in axle sets.
Inspect the fluid level in the brake master cylinder reservoir.
If the brake fluid level is midway between the maximum-full point and
the minimum allowab ...
Engine Oil Cooler Disassemble
Remove the oil cooler coolant inlet hose clamp (2).
Remove the oil cooler coolant inlet hose (1).
Remove the oil cooler coolant inlet pipe bolt (7)
Remove the oil cooler coolant inlet pipe (3) and the seal ring (6).
Remove the oil cooler coolant out ...
Transmission Mount Bracket Replacement - Rear
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front suspension skid plate, if equipped.
Refer to Drivetrain and Front Suspension Frame Skid
Plate Replacement.
Using a suitable jack stand, support the rear of the ...