Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Air Inlet Grille Panel Replacement

Chevrolet Sonic Repair Manual / Body / Body Exterior / Front Grille / Air Inlet Grille Panel Replacement



Air Inlet Grille Panel Replacement

Callout

Component Name

Preliminary Procedure

  1. Remove both wiper arm assemblies. Refer to Windshield Wiper Arm Replacement.
  2. Remove both outer hood rear seals. Refer to Hood Rear Seal Replacement.

1

Air Inlet Grille Panel Retainer (Qty:?€‰4)

Procedure

Release and remove the retainers from the air inlet grille panel.

2

Air Inlet Panel Screw

Caution:

Refer to Fastener Caution.

Procedure

  1. Remove the screw cover from the air inlet grille panel.
  2. Remove the air inlet grille panel screw.

    Tighten


    2.5?€‰Y (22?€‰lb?€‰in)

3

Air Inlet Grille Panel

Procedure

  1. Lift the front edge of the grille panel off the front edge of the dash upper extension panel opening cover.
  2. Slide the grille panel forward from both hood hinges.
  3. Remove the grille panel from the vehicle.
  4. Remove the hood rear weather-strip. Refer to Hood Rear Weatherstrip Replacement.
Front Grille
...

Front Lower Grille Replacement
Front Lower Grille Replacement Callout Component Name Preliminary Procedures Remove the front bumper fascia assembly. Refer to Fron ...

Other materials:

Front Wheelhouse Liner Replacement (Rear)
!l Front Wheelhouse Liner Replacement Callout Component Name Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. 1 Front Wheelhouse Rear Li ...

Park - Engine Running (Gen 1)
When the gear selector lever is in the Park (P) position, fluid is drawn into the pump through the transmission fluid filter assembly. Line pressure is then directed to the following valves: Fluid Pressure Directed in Preparation for a Shift Manual Valve Mechanically controlled by ...

Engine Front Cover and Oil Pump Disassemble
Engine Front Cover Disassemble Remove the intake camshaft position sensor bolt (1). Remove the intake camshaft position sensor (2) and the seal ring (3). Remove the exhaust camshaft position sensor bolt (6). Remove the exhaust camshaft posi ...

© 2014-2025 Copyright www.csmans.com
 
0.0084