Clear debris from the air intakes, between the hood and windshield when washing the vehicle.
Cleaning Exterior Lamps/ Lenses, Emblems, Decals and Stripes
Windshield and Wiper BladesParking/Turn Signal Lamp
1. Open the hood. See Hood.
2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly
by turning counterclockwise.
3. Remove the bulb from the bulb socket by pulling it straight out.
4. Install the new bulb in the bulb socket.
5. Install the bulb socket into the headlamp ...
OnStar Description and Operation
This OnStar® system consists of the following components:
Telematics communication interface control module
OnStar® three button assembly
Microphone
Cellular antenna
Navigation antenna
Bluetooth® antenna (If equipped)
Back up battery (If equipped)
This system also interfaces wi ...
Strut Assembly Removal and Installation
Special Tools
CH 49375 Strut Rod Nut Socket
For equivalent regional tools, refer to Special Tools
Removal Procedure
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. ...