|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the front floor console cover. Refer to Front Floor Console Cover Replacement. |
|
|
1 |
Automatic Transmission Control Indicator Opening Cover Assembly Procedure
Release the retainer clips securing the transmission control indicator to the front floor console cover. |
Audible Warnings Description and Operation
Brake Fluid Level Indicator Switch ReplacementThrust Washer and Bearing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exposed to chemicals.
Caution: Do not allow the bearings to spin. Turn them slowly by
hand. Spinning the beari ...
Front Brake Caliper Overhaul
Disassembly Procedure
Warning: Refer to Brake Dust Warning.
Warning: Refer to Brake Fluid Irritant Warning.
Warning: Do not place fingers in front of the caliper piston(s)
in an attempt to catch or protect it when applying compressed air. The
piston(s) ...
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...