Chevrolet Sonic Repair Manual: Automatic Transmission Flex Plate Removal
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
- Install the EN-652 holder (1) to hold the automatic transmission flex plate (2).
- Loosen the 6 automatic transmission flex plate bolts.
- Remove the EN-652 holder (1).
- Remove the 6 automatic transmission flex plate bolts (2).
- Remove the automatic transmission flex plate (1).
Automatic Transmission Flex Plate Installation
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
Clean the automatic transmission flex plate bolt threads.
Install ...
Automatic Transmission Flex Plate Replacement
Automatic Transmission Flex Plate Replacement
Callout
Component Name
Preliminary Procedure
Remove the transmission. Refer to Tr ...
Other materials:
Emblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Rear Wheelhouse Liner Replacement (Sedan - Left)
Rear Wheelhouse Liner Replacement
Callout
Component Name
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and
Installation.
1
Rear Wheelhouse Panel Liner ...
Turbocharger Removal
Special Tool
EN-49942 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Install the EN-49942 holding wrench (2) to the turbocharger coolant
feed pipe. Guide a ratchet wrench (1) along with an extension through EN-49942
holding wrench to the turbo ...
0.0053