|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tail lamp assembly. Refer to Tail Lamp Replacement. |
|
|
1 |
Back Up Lamp Bulb Socket Procedure
Rotate the back up lamp bulb socket counter-clockwise and remove from the tail lamp housing. |
|
2 |
Back Up Lamp Bulb Procedure
Push inward while rotating counter-clockwise on the bulb and remove from the lamp socket. |
Bulbs
Cargo Center Courtesy Lamp Bulb Replacement (Hatchback)When the System Does Not Seem To Work Properly
If the LDW symbol does not appear:
The lane markings on the road may not be seen.
The camera sensor may be blocked by dirt, snow or ice.
The windshield may be damaged.
The weather may be limiting visibility.
This is normal operation; the vehicle does not need service. Clean the windshie ...
Hood Insulator Replacement
Hood Insulator Replacement
Callout
Component Name
1
Hood Insulator Plastic Retainer (Qty:?€‰6)
2
Hood Insulator
Procedure
Ensure the 3 integral tabs are secured to the hood.
...
Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Pipe Joint Compound
Note: Three types of sealer are commonly used in engines. These
are RTV sealer, anaerobic gasket eliminator sealer, and pipe joint compound.
The correct sealer and amount must be used in the proper location to prevent
oil leaks. DO NOT interchange the 3 ...