|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tail lamp assembly. Refer to Tail Lamp Replacement. |
|
|
1 |
Back Up Lamp Bulb Socket Procedure
Rotate the back up lamp bulb socket counter-clockwise and remove from the tail lamp housing. |
|
2 |
Back Up Lamp Bulb Procedure
Push inward while rotating counter-clockwise on the bulb and remove from the lamp socket. |
Exterior Lighting Systems Description and Operation
Backup Lamp Switch ReplacementFront Side Door Lock Cylinder Rod Replacement
Front Side Door Lock Cylinder Rod Replacement
Callout
Component Name
Preliminary Procedure
Remove the rear side door window rear guide. Refer
to Rear Side Door Window Rear Guide Replacement.
Remove the rear side door ...
SIR Service Precautions
General Service Instructions
Warning: When performing service on or near the SIR components
or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling
and Enabling . Failure to observe the correct procedure could cause deployment
of the SIR components, person ...
Neutral - Engine Running (Gen 1)
When the gear selector is moved to the Neutral (N) position, the hydraulic and
electrical system operation is identical to Park (P) range. However, if Neutral
is selected after the vehicle was operating in Reverse (R), the normally-high 35R
pressure control solenoid 2 is commanded OFF and the ...