Callout |
Component Name |
---|---|
Preliminary Procedures
|
|
1 |
Body Harness Terminal Bolt Caution: Refer to Fastener Caution.
9 Y (80 lb in) |
2 |
Body Harness Terminal |
3 |
Battery Negative Post Clamp Nut Tighten
9 Y (80 lb in) |
4 |
Battery Negative Frame Ground Nut Tighten
22 Y (16 lb ft) |
5 |
Battery Negative Cable Procedure
Transfer the current sensor, noting the location and direction on the cable. |
Top Tether Anchor
A top tether (3, 4) anchors the top of the child restraint to the vehicle. A
top tether anchor is built into the vehicle. The top tether attachment (2) on the
child restraint connects to the top tether anchor in the vehicle in order to reduce
the forward movement and rotation of the child re ...
Strut and Shock Absorber Inspection (Shock Absorber)
Note: The shock absorber assembly DOES NOT have to be removed from
the vehicle to perform the following inspection procedure.
Note: A light film of oil on the top portion of the lower shock absorber
tube is normal. DO NOT replace the shock absorber for this condition.
Condition ...
Gear Position Sensor Replacement
Gear Position Sensor Replacement
Callout
Component Name
Preliminary Procedure
Unclip the engine control module (ECM) and bracket from the battery tray.
1
Gear Position Sensor Magnet Bolt
...