Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Battery Tray Replacement



Battery Tray Replacement

Callout

Component Name

Preliminary Procedures

  1. Remove the battery. Refer to Battery Replacement.
  2. Unclip the engine control module (ECM) bracket from the battery tray and set aside.
  3. Unclip the battery current sensor from the battery tray and set aside.

1

Battery Tray Bolt (Qty: 3)

Caution:

Refer to Fastener Caution.

Tighten


14 Y (10 lb ft)

2

Battery Tray

Battery System
...

Battery Current Sensor Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Disconnect the battery current sensor from the body ...

Other materials:

Rear Vision Camera (RVC)
This vehicle may have the RVC system. Read this entire section before using it. The RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. Warning The RVC system does not display children, pedestrians, bicyclists, animals, or any other object loc ...

Water Outlet Replacement (LUV)
Removal Procedure Drain the engine coolant system. Refer to Cooling System Draining and Filling. Remove the following: Engine coolant air bleed hose (1) Engine coolant temperature sensor (2) and connector clip (3) Heated oxygen senso ...

Cylinder Head Installation
Special Tools EN-45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Clean the sealing surfaces. Inspect for plane surface. Cylinder block, cylinder head Straight-edge, feeler gauge Install the cylinder head gasket. Install the cylinder head. ...

В© 2014-2025 Copyright www.csmans.com
 
0.0059