Chevrolet Sonic Repair Manual: Body Panel Paint Protector Replacement (VGC)
- The paint protective film and vehicle surface temperature should be 13?€“32?°C (55?€“90?°F) for best results.
- Automatic car washes should be avoided for at least 24?€‰hours after the paint protective film application.
- Wipe the vehicle surface with isopropyl alcohol or flash naptha at the application area.
- Dry the surface with a clean lint-free cloth.
- Create a mixture of 25 percent isopropyl alcohol and 75 percent water and two drops of baby shampoo per 16?€‰oz of fluid mixture.
- Remove the backing liner from the protective film patch.
- Use the solution to liberally spray the adhesive side of the protective patch, the mounting location along with your hands.
- Position the paint protective film patch to the desired location on the vehicle.
- Spray the surface of the film with the alcohol, water and soap solution.
- Using a dampened squeegee, start at the center of the protective patch, working outward in order to remove the air and solution from under the protective patch.
- Release any air bubbles with a pin.
- Dry the surface with a clean, lint-free cotton cloth.
Basecoat/Clearcoat Paint Systems
Warning: Exposure to isocyanates during paint preparation and application
processes can cause severe breathing problems. Read and follow all of the instructions
from the manufacturers of pain ...
Brake Fluid Effects on Paint and Electrical Components Caution
Caution: Avoid spilling brake fluid onto painted surfaces, electrical
connections, wiring, or cables. Brake fluid will damage painted surfaces and
cause corrosion to electrical components. If ...
Other materials:
Cleaning Exterior Lamps/ Lenses, Emblems, Decals and Stripes
Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean
exterior lamps, lenses and emblems. Follow instructions under "Washing the Vehicle"
previously in this section.
Lamp covers are made of plastic, and some have a UV protective coating.
Use only lukewarm wat ...
Front Side Door Window Weatherstrip Replacement
Front Side Door Window Weatherstrip Replacement
Callout
Component Name
Preliminary Procedures
Remove front side door trim panel. Refer to Front Side Door Trim
Replacement.
Remove the outside rearview mirror. Refer to Outs ...
Fuel Pump Control Module Programming and Setup
The fuel pump control module must be programmed with the proper calibration software.
The module stores and utilizes this information however if it is not properly configured
with the correct calibration software, the fuel pump control module will not control
all of the vehicle features proper ...
0.007