|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the body side trim panel. Refer to Body Side Trim Panel Replacement. |
|
|
1 |
Body Rear Seat Back Trim Panel Retainer (Qty:?€‰3) Procedure
Pull the rear seat back cushion latch release located on the top of the rear seat back cushion, and fold the rear seat back cushion forward. |
|
2 |
Body Rear Seat Back Trim Panel Assembly |
Body Lock Pillar Upper Trim Panel Replacement (Sedan)
Body Side Trim Panel Replacement (Sedan)Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width. For example:
Treadwear 200 Traction AA Temperature A
The following information relates to the system developed by the United States
National Highway Traffic Safety Administration ...
Water Outlet Installation
Clean the sealing surfaces.
Install the water outlet (2) and a NEW water outlet seal ring (1).
Caution: Refer to Fastener Caution.
Install the 3 water outlet bolts (3) and tighten to 8 Y (71 lb in).
...
Ignition Coil Removal
Special Tools
EN-6009 Remover and Installer Ignition Module
For equivalent regional tools, refer to Special Tools.
Remove the 2 ignition coil bolts (1).
Install EN-6009 remover and installer (2) and remove the ignition
coil (1).
...