Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Brake Drum Diameter Measurement

Chevrolet Sonic Repair Manual / Chassis / Brakes / Drum Brakes / Brake Drum Diameter Measurement



    Warning:

    Refer to Brake Dust Warning.

  1. Remove brake drum. Refer to Brake Drum Replacement
  2. Clean the brake shoe lining contact surface of the brake drum (2) with denatured alcohol or an equivalent approved brake cleaner.
  3. Using a brake drum micrometer (1) calibrated in thousandths-of-an-inch, measure and record the largest diameter of the brake drum at four or more points, equally spaced around the drum.

    Ensure the measurements are only taken within the brake shoe lining contact area. The micrometer must be positioned the same distance from the outside edge of the drum for each measurement.

  4. Compare the largest diameter measurement recorded to the brake drum component specifications. Refer to Drum Brake Component Specifications.
  5. If the largest diameter measurement of the brake drum is less than the maximum allowable inside diameter after refinishing specification; the drum may be refinished, depending upon surface and wear conditions.
  6. If the largest diameter measurement of the brake drum is equal to or greater than the maximum allowable diameter after refinishing specification; the drum may not be refinished.
  7. If the largest diameter measurement of the brake drum is equal to or greater than the discard diameter specification; the drum requires replacement.
  8. Install brake drum. Refer to Brake Drum Replacement.
Drum Brakes
...

Brake Drum Refinishing
Special Tools CH-41013 Rotor Resurfacing Kit CH-42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Warning: Refer to Brake Dust Warning. T ...

Other materials:

Instrument Panel Compartment Replacement
Instrument Panel Compartment Replacement Callout Component Name Preliminary Procedure Remove the right instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement - Right Side. ...

Intake Air Pressure and Temperature Sensor Replacement
Intake Air Pressure and Temperature Sensor Replacement Callout Component Name Preliminary Procedure Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement. 1 Intake ...

Main Shaft Assemble (Gen 2)
Special Tools 3-0207944 Main Shaft Tapered Bearing Insert Tool For equivalent regional tools, refer to Special Tools. Install the 4th gear bearing assembly (1). in!i.l.i-if Note: The 3rd gear blocking ring lugs must be aligned with the 3rd/4th gear synchronizer ass ...

В© 2014-2024 Copyright www.csmans.com
 
0.0085