Chevrolet Sonic Repair Manual: Brake Pressure Modulator Valve Bracket Replacement
- Removal Procedure
-
- Remove the brake pressure modulator valve (BPMV) and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement.
- Remove the BPMV bolts (1).
- Remove the BPMV bracket.
- Installation Procedure
-
- Install the BPMV bracket to the BPMV.
- Install the BPMV bolts (1) and tighten to 11 Y (97 lb in)
.
- Install the BPMV and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement.
Caution:
Refer to Fastener Caution.
Antilock Brake System Automated Bleed
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components
Caution.
Note: Before performing the Antilock Brake System ...
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution.
Caution: Always ...
Other materials:
Parking and Turn Signal Lamp Bulb Replacement
Parking and Turn Signal Lamp Bulb Replacement
Callout
Component Name
Preliminary Procedures
Open and support the hood assembly.
Reposition the air cleaner inlet duct on the passenger side of the
engine compartment.
Re ...
Air Cleaner Element Replacement
Removal Procedure
Disconnect mass air flow sensor wiring harness plug (2) from mass air
flow sensor (3).
Unclip mass air flow sensor wiring harness retainer clip from air cleaner
housing (1).
Remove the air cleaner outlet duct clamp̴ ...
Transmission Rear Mount Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove and DISCARD the rear transmission mount bracket
to rear mount through bolt (1).
Remove rear transmission mount to frame bolt (3).
Push and hold ...
0.0057