Chevrolet Sonic Repair Manual: Cargo Cover (Hatchback)
Warning:
An unsecured cargo cover could strike people in a sudden stop or turn, or in a crash. Store the cargo cover securely or remove it from the vehicle.
The cargo cover can be used to cover items in the rear of the vehicle.
To remove the cargo cover:
- Remove both of the cords from the hooks at the top of the liftgate.
- Push up on the underside of the cargo cover at both pins at the front sides of the cargo cover.
To install the cargo cover:
- Align the clips on the underside of the cargo cover over the pins on both sides of the cargo area and push down.
- Reconnect both of the cords to the hooks at the top of the liftgate.
Instrument Panel Storage
Lift up on the lever to open.
If equipped, the storage area has an auxiliary input jack and USB port inside. ...
Other materials:
Front Wheel Drive Shaft Inner Joint and Boot Replacement
Special Tools
DT-35910 Drive Axle Boot Clamp Pliers
For equivalent regional tools, refer to Special Tools.
Disassemble Procedure
Note: There are types of inner joints available. If the inner
joint is connected with the CV style joint, the inner joint is not serviced
separa ...
Tire and Wheel Balancing (Wheel Pilot Bore Greasing)
Beginning with MY 2011 vehicle, pilot bore grease should be applied.
To enable this, grease must be applied to the pilot bore to prevent the
wheel from seizing onto the hub.
Refer to Adhesives, Fluids, Lubricants, and Sealers for pilot bore lubricant
part number.
Do not use any pene ...
Battery Current Sensor Replacement
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Disconnect the battery current sensor from the body harness connector.
Unclip the battery current sensor from the battery tray.
Remove the battery ...
0.0058