Bushing and Mating Shaft InspectionTire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...
Lubrication Description
Oil is applied under pressure to the crankshaft (8), connecting rods (5), camshaft
adjuster (1), camshaft bearing surfaces (3) and valve tappets (4). All other moving
parts are lubricated by gravity flow or splash. Oil enters the rotor type oil pump (10)
...
Crankcase Ventilation System Inspection/Diagnosis
Results of Incorrect Operation
A plugged positive crankcase ventilation (PCV) orifice or hose may cause
the following conditions:
Rough idle
Stalling or slow idle speed
Oil leaks
Oil in the throttle body
Sludge in the engine
Functional Check
With thes ...