Chevrolet Sonic Repair Manual: Channel Plate - Control Solenoid (w/Body and TCM) Valve Assembly Side

Case Porosity Repair

Some external leaks are caused by case porosity in non-pressurized areas. Thoroughly clean the area to be repaired with a cleaning solvent. Air dry the area. Warning: Epoxy adhesive may ...

Channel Plate - Control Solenoid Valve Assembly Side (Right)

...

Other materials:

Emblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution. The part and vehicle surface should be 21?°C (70?°F) prior to installation. The vehicle should remain inside in a temperature range of 21?°C (70?°F) for 1 hour after assembly to allow the adhesive to develop sufficient bo ...

Engine Oil Cooler Housing Removal
Remove the 2 engine oil cooler pipe bolts (1). Remove the oil cooler pipe (2). h.\.\,.\\..,v:..// Remove the 5 engine oil cooler housing bolts (2). Remove the engine oil cooler housing (1). Remove the engine oil cooler inlet pi ...

Engine Oil and Oil Filter Replacement
Removal Procedure Open hood. Place a drain pan below the vehicle. Caution: To prevent damage to oil filter cap ensure proper tool is used. Do not use an open end wrench which may cause damage to filter cap. Using a 24mm socket or closed end wrench loosen ...