Intake Manifold Replacement
Special Tools
EN-34730?E1 Pressure Tester
EN-6015 Closure Plugs
For equivalent regional tools, refer to Special Tools
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the engine sight shield. ...
Engine Oil and Oil Filter Replacement
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
Caution: To prevent damage to oil filter cap ensure proper
tool is used. Do not use an open end wrench which may cause damage to
filter cap.
Using a 24mm socket or closed end wrench loosen ...
Crankshaft Position System Variation Learn
Note: The crankshaft position sensor system variation learn procedure
is required when the following service procedures have been performed, regardless
of whether DTC P0315 is set:
Engine replacement
Engine control module (ECM) replacement
Crankshaft damper replacement
...