Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Clutch Master Cylinder Reservoir Hose Replacement

Chevrolet Sonic Repair Manual / Powertrain / Transmission/Transaxle / Manual / Clutch / Clutch Master Cylinder Reservoir Hose Replacement

Removal Procedure


    Note:

    Before disconnecting the reservoir tank hose, remove the clutch/brake fluid from the reservoir tank.

  1. Remove the clutch master cylinder reservoir hose (1) from the reservoir tank.
  2. Remove the clutch master cylinder reservoir hose from the clutch master cylinder.
Installation Procedure

    Install the clutch master cylinder reservoir hose (1)
  1. Install the clutch master cylinder reservoir hose (1) to the reservoir tank and the master cylinder.
  2. Bleed The hydraulic clutch system. Refer to Hydraulic Clutch System Bleeding.
  3. Fill the reservoir with GM approved brake fluid from a clean, sealed brake fluid container up to the MAX level.
Clutch Pedal Position Sensor Replacement
Removal Procedure Remove the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement. Remove the clutch pedal position sen ...

Automatic Transmission Flex Plate Installation
Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Clean the automatic transmission flex plate bolt threads. Install ...

Other materials:

Park Brake and P (Park) Mechanism Check
Warning: When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move. ...

Lower Control Arm Replacement
Removal Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Remove the front wheelhouse rear liner. Refer to Front Wheelhouse Liner Replacement. Re ...

Transmission General Description
The Hydra-matic 6T30/40/45/50 is a fully automatic, 6-speed, front-wheel drive, electronic-controlled transmission. It consists primarily of a 4-element torque converter, a compound planetary gear set, friction and mechanical clutch assemblies, and a hydraulic pressurization and control system ...

В© 2014-2022 Copyright www.csmans.com
 
0.0073