Chevrolet Sonic Owner's Manual: Collision/Detection

Comfort and Convenience

Select the and the following may display: Chime Volume Auto Wipe in Reverse Gear Chime Volume Select to set the chime volume level. Select Normal or High. Auto Wipe in Reverse Gear Select ...

Lighting

Select and the following may display: Exit Lighting Vehicle Locator Lights Exit Lighting Select to set how long the exterior lamps stay on when leaving the vehicle and it is dark outside. ...

Other materials:

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Ensure that the steering wheel is set in a straight ahead position. Loosen the tie rod jam nut (1). Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications. Caution: Refer to Fastener Caution. Tighten the t ...

Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange, remeasure the tire and wheel assembly on-vehicle runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Mark the location of the high spot on the tire and wheel asse ...

Battery Positive Cable Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the underhood fuse block cover. Remove the battery positive nut (1) and the battery positive cable (2), from the underhood fus ...