Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Communication Interface Module Battery Replacement

Chevrolet Sonic Repair Manual / Electrical / Battery System / Communication Interface Module Battery Replacement



Communication Interface Module Battery Replacement

Callout

Component Name

Preliminary Procedure

Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement

1

Communication Interface Module Battery

Procedure

  1. Disconnect the electrical connector.
  2. Reprogramming of the module may be necessary after losing battery power.
  3. For programming and set up procedures, refer to Control Module References.
Battery Replacement
Removal Procedure Open the hood. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the battery retainer bo ...

Charging
...

Other materials:

Airbag Readiness Light
This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners (if equipped), the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag ...

Ignition Coil Removal
Special Tools EN-6009 Remover and Installer Ignition Module For equivalent regional tools, refer to Special Tools. Remove the 2 ignition coil bolts (1). Install EN-6009 remover and installer  (2) and remove the ignition coil (1). ...

Camshaft Timing Chain Adjustment
Special Tools EN-952 Fixing Pin EN-953–A Fixing Tool EN-49977?E00 Fixation Sensor Discs For equivalent regional tools, refer to Special Tools. Remove the ignition coil. Refer to Ignition Coil Replacement. Remove the camshaft cover. Refer to Camshaft Cover Replacement. Remove ...

© 2014-2026 Copyright www.csmans.com
 
0.0061