Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Connecting and Controlling an iPod®

Chevrolet Sonic Owner's Manual / Infotainment System / Audio Players / USB Port / Connecting and Controlling an iPod®

Not all iPods can be controlled by the infotainment system.

Connecting an iPod

Connect the iPod to the USB port.

Searching for a Track

Tracks can be searched for by:

To search for tracks:

1. Turn the Push/MENU/ TUNE knob.

2. Select Search.

3. Select: Playlists, Artists, Albums, Song Titles, Podcasts, Genres, Audiobooks, or Composers.

4. Select the track.

Shuffle

Turn the Push/MENU/TUNE knob and set Shuffle Songs (Random) to On or Off, then press the the main screen. BACK button to return to
the main screen.

On: Plays tracks in the current folder in random order.

Off: Plays tracks in the current folder in sequential order.

Repeat

Turn the Push/MENU/TUNE knob and set Repeat to On or Off, then press the On: Repeats the current track. BACK button to return to the main screen.


On: Repeats the current track.

Off: Playback starts from the beginning of the current track after the last track finishes.

Radio without Touchscreen
For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system: iPods USB Drives Not all iPods and USB Drives are compatible with the infotai ...

Connecting and Controlling a USB Drive
The infotainment system can only play back.mp3 and.wma files from a USB drive. Only the first 2,500 songs are recognized on the device. When a device is not supported, the message “No supported da ...

Other materials:

Remote Lock, Unlock, Start
Select Remote Lock, Unlock, Start and the following may display: Remote Unlock Feedback Remote Lock Feedback Remote Door Unlock Remote Unlock Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Select On or Off. Remote Lock Feedback T ...

Backup Lamp Switch Replacement
Removal Procedure Disconnect the electrical connector from the backup lamp switch?€‰(1). Remove the backup lamp switch?€‰(1) from the transmission. Remove and DISCARD the backup lamp switch washer from the backup lamp switch. Installation Proc ...

Fuel Injection Fuel Rail Assembly Replacement
Removal Procedure Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove engine cover. Refer to Engine Cover Replacement. Remove the fuel feed pipe from fuel injection fuel rail. Refer to Fuel Feed Pipe Replacement. Re ...

© 2014-2022 Copyright www.csmans.com
 
0.0076