Chevrolet Sonic Repair Manual: Control Solenoid Valve and Transmission Control Module Assembly Installation
|
Callout |
Component Name |
|---|---|
|
1 |
Control Solenoid Valve Assembly Filter Plate Caution: Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination. Note: Install a NEW filter plate to prevent fluid leaks past the fluid seals. |
|
2 |
Control Solenoid (w/Body and TCM) Valve Assembly |
|
3 |
Control Valve Body Bolt M5 x 40.5 (Qty: 3) Caution: Refer to Fastener Caution.
7 Y (62 lb in) |
|
4 |
Control Valve Body Bolt M6 x 97 (Qty: 12) Tighten
10 Y (89 lb in) |
Control Solenoid Valve and Transmission Control Module Assembly Inspection
Verify the conditions listed below do not exist. Carefully
inspect the control solenoid valve assembly connectors and pins (1, 2, 4, 6)
for the condition. Repair or replace as neces ...
Control Solenoid Valve and Transmission Control Module Assembly Replacement
Removal Procedure
Remove the transmission control valve body cover.
Refer to Control Valve Body Cover Replacement.
Disconnect the output speed sensor electrical con ...
Other materials:
Airbag Roof Side Rail Module Replacement - Rear
Airbag Roof Side Rail Module Replacement - Rear
Callout
Component Name
Warning: In order to prevent SIR deployment, personal injury,
or unnecessary SIR system repairs, do not strike the door or the door
pillar in the ...
Camshaft Position Actuator Adjuster Removal
Special Tools
EN-6340 Camshaft Adjuster Locking Tool
EN-6628-A Camshaft Locking Tool
For equivalent regional tools, refer to Special Tools.
Note: The right half of the EN-6340 locking tool can be
recognized by the lettering "right", arrow, on the tool.
Pre ...
3-5-Reverse and 4-5-6 Clutch Housing, and Input, Reaction, and Output Carrier
Installation
3-5-Reverse and 4-5-6 Clutch Housing, and Input, Reaction, and Output
Carrier Installation
Callout
Component Name
1
3? Reverse and 4?? Clutch Housing Thrust Bearing
2
2? Clutch Apply Plate ...
0.0072